AS ISO 16714:2021 pdf download

AS ISO 16714:2021 pdf download.Earth-moving machinery — Recyclability and recoverability — Terminology and calculation method
1  Scope
This International Standard specifies a method, and defines related terms, for calculating the recyclability rate and the recoverability rate of earth-moving machinery as defined in ISO 6165, each expressed as a percentage by mass (mass fraction in percent) of the machine, which can potentially be
— recycled, reused or both (recyclability rate), or
— recovered, reused or both (recoverability rate).
NOTE  Remanufacturing is included in re-use.
The calculation can be performed by the machine manufacturer from the time when a machine is initially put on the market.
2  Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 6016, Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components
ISO 6165, Earth-moving machinery — Basic types — Identification and terms and definitions
3  Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6016 and the following apply.
3.1 dismantlability
ability of component parts to be removed from the machine
Note 1 to entry: Adapted from ISO 22628:2002, definition 3.5.
3.2 end-of-life machine
machine that has completed its useful life and is taken out of service for disposal
3.3 recovery
reprocessing in a production process of the waste materials for the original purpose or for other purposes, together with processing as a means of generating energy
[SOURCE: ISO 22628:2002, definition 3.4]
Note 1 to entry: See Figure 1.
3.4 recoverability
ability of component parts, materials or both that can be diverted from an end-of-life stream to be recovered
[SOURCE: ISO 22628:2002, definition 3.9]
3.6 recycling
reprocessing in a production process of the waste materials for the original purpose or for other purposes, excluding processing as a means of generating energy
[SOURCE: ISO 22628:2002, definition 3.3]
Note 1 to entry: See Figure 1.
3.7 recyclability
ability of component parts, materials or both that can be diverted from an end-of-life stream to be recycled
[SOURCE: ISO 22628:2002, definition 3.7]
3.8 recyclability rate
R cyc
percentage by mass (mass fraction in percent) of the new machine potentially able to be recycled,reused or both
Note 1 to entry: Adapted from ISO 22628:2002, definition 3.8.
Note 2 to entry: See Figure 1.
3.9 remanufacturing
process by which value is added to component parts of end-of-life machines in order to return them to their original same -as-new condition or better