UL 61058-2-6:2020 free download

UL 61058-2-6:2020 free download Switches for Appliances – Part 2-6: Particular Requirements for Switches Used In Electric Motor-Operated Hand- Held Tools, Transportable Tools and Lawn and Garden Machinery
1 Scope
Clause 1 of lEC 61058-1:2016 is applicable except as follows.
Addition:
This part of lEC 61058 is a subset based on lEC 61058-1.The clauses outlined below are intended toaddress the specific requirements for switches incorporated into or integrated with electric motor-operatedhand-held tools, transportable tools and lawn and garden machinery.
This document is intended for switches with an ambient temperature up to and including 55 °C.Switchestested according to lEC 61058-1 are considered to comply with this document and additional testing is notrequired provided ratings, loads, and endurance are correct.
NOTE This document takes into account the fact that tests are conducted as part of the end-product evaluation (e.g.products testedaccording to the lEC 60745 and IEC 62841 series, and lawn and gardening equipment tested according to the IEC 60335 series)and that tests are not conducted on the component switch.
2 Normative References
Clause 2 of IEC 61058-1:2016 is applicable except as follows.
Addition:
IEC 61058-1:2016, Switches forappliances – Part 1: General requirements
3 Terms and definitions
Clause 3 of IEC 61058-1:2016 is applicable.
4 General requirements
Clause 4 of IEC 61058-1:2016 is applicable.
5 General information on tests
Clause 5 of IEC 61058-1:2016 is applicable.
6 Rating
Clause 6 of IEC 61058-1:2016 is applicable.
7 Classification
Clause 7 of IEC 61058-1:2016 is applicable except as follows.
7.3.2 IEC 61058-1:2016, 7.3.2 is not applicable.
7.3.3 IEC 61058-1:2016, 7.3.3 is not applicable.
7.7.1 IEC 61058-1:2016, 7.7.1 is not applicable.
7.7.2 IEC 61058-1:2016, 7.7.2 is not applicable.
8 Marking and documentation
Clause 8 of IEC 61058-1:2016 is applicable except as follows.
8.1.1 General
Addition:
Switches declared for use in appliances such as power tools are considered unique type (UT) when referencing Table 3.
8.1.3 By documentation
Replacement ofTable 3:
8.3 Load rating
IEC 61058-1:2016, 8.3 is applicable except as follows.
8.3.2 Substantially restive load
IEC 61058-1:2016, 8.3.2 is not applicable.
8.3.4 Resistive load and capacitive load
IEC 61058-1:2016, 8.3.4 is not applicable.
8.3.5 Resistive load and tungsten filament lamp load
IEC 61058-1:2016, 8.3.5 is not applicable.
8.3.6 Declared specific load
IEC 61058-1:2016, 8.3.6 is not applicable.
8.3.8 General purpose loads
IEC 61058-1:2016, 8.3.8 is not applicable.
Addition:
8.101 Switch compliance with IEC 61058-2-6
The marking to indicate compliance with IEC 61058-2-6 shall be “PT”.
Compliance is checked byinspection.
9 Protection against electric shock
Clause 9 of IEC 61058-1:2016 is applicable except as follows.
9.1 IEC 61058-1:2016, 9.1 is not applicable.
NOTE The requirements of this subclause are covered in the end-product standard.
10 Provision for earthing
Clause 10 of IEC 61058-1:2016 is not applicable.
11 Terminals and terminations
Clause 11 of IEC 61058-1:2016 is applicable.
12 Construction
Clause 12 of IEC 61058-1:2016 is not applicable.
NOTE The requirements of this clause are covered in the end-product standard.