SAE J1388:2003 pdf download Personnel Protection – Skid Steer Loaders
1. Scope—This SAE Standard is intended to provide personnel protection guidelines for skid steer loaders. This document is intended as a guide towards standard practice, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. This document provides performance criteria for newly manufactured loaders and it is not intended for in-service machines.
2. References
2.1 Applicable Publications—The following publications form a part of the specification to the extent specified herein. Unless otherwise indicated, the latest revision of SAE publications shall apply.
2.1.1 SAE P UBLICATIONS —Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001
SAE J1 53—Operator Precautions
SAE J674—Safety Glazing Materials—Motor Vehicles and Motor Vehicle Equipment
SAE J1 042—Operator Protection for General-Purpose Industrial Machines
SAE J2292—Combination Pelvic/Upper Torso (Type 2) Operator Restraint System for Off-Road Work Machines
SAE J/ISO 341 1—Earth-moving machinery—Human physical dimensions of operators and minimum operator space envelope
SAE J/ISO 3449—Earth-moving machinery—Falling-object protective structures—Laboratory tests and performance requirements
SAE J/ISO 3450—Earth-moving machinery—Braking systems of rubber-tyred machines—Systems and performance requirements and test procedures
SAE J/ISO 3471 —Earth-moving machinery—Rollover Protective Structures—Laboratory tests and performance requirements
SAE J/ISO 5353—Earth-moving machinery, and tractors and machinery for agriculture and forestry—Seat index point
SAE J/ISO 6165—ldentificationTerminology of Earthmoving Machines
SAE J/ISO 6682—Earth-moving machinery—Zones of comfort and reach for controls
SAE J/ISO 9244—Earth-moving machinery—Safety signs and hazard pictorials—General principles
SAE J/ISO 10533—Earth-moving machinery—Lift-arm support devices
SAE J/ISO 10265—Earth-moving machinery—Crawler machines—Performance requirements and test procedures for braking systems
2.1.2 ISO P UBLICATIONS —Available from ANSI, 25 West 43rd Street, New York, NY 10036-8002.
ISO 2867—Earth-moving machinery-Access Systems
ISO 3457—Earth-moving machinery-Guards – Definitions and Requirements
ISO 5006—Earth-moving machinery—Operator’s field of view—Parts 1, 2 and 3
ISO 6405-1 —Earth-moving machinery—Symbols for operator controls and other displays
ISO 6405-2—Earth-moving machinery—Symbols for operator controls and other displays
ISO 6683—Earth-moving machinery—Seat belts and seat belt anchorages
ISO 6750—Earth-moving machinery—Operation and maintenance—Format and content of manuals
ISO 7131 —Earth-moving machinery—Terminology and commercial specifications
ISO 1 0968—Earth-moving machinery—Operator’s controls
ISO 12508—Earth-moving machinery—Operator station and maintenance areas – Bluntness of edges
ISO 1 4397-1—Earth-moving machinery—Loaders and backhoe loaders—Calculation of rated operating capacity and test method for verifying calculated tipping load
ISO 1 4397-2—Earth-moving machinery—Loaders and backhoe loaders—Test method for measuring breakout forces and lift Capacity to maximum lift height
3. Definitions
3.1 A loader is a self propelled crawler or wheeled machine, having front-mounted equipment primarily designed for loading operation (bucket use), which loads or excavates through forward motion of the machine.
NOTE— A loader work cycle normally comprises filling, elevating, transporting, and discharging material.
SAE J1388:2003 pdf download
![SAE J1388:2003 pdf download](https://www.onlinestandardssearch.com/wp-content/uploads/2022/10/SAE-J1388.png)