SAE J515:2001 pdf download Specification for Hydraulic O-Ring Materials, Properties, and Sizes for Metric and Inch Stud Ends, Face Seal Fitting and Four-Screw Flange Tube Connections
1. Scope—SAE J51 5 covers the specification for hydraulic O-ring material and properties and sizes applicable to face seal fittings, metric and inch stud ends, and four-bolt flange fittings. The standard includes a size code to allow industry and government agencies to order O-ring with a coded part number.
2. References
2.1 Applicable Publications—The following standards contain provisions which, through reference in this text, constitute provisions of this document. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this document are encou
2.1 .1 SAE P UBLICATIONS —Available from SAE, 400 Commonwealth Drive, Warrendale, PA 1 5096-0001 .
SAE AS568A—Aerospace Size Standard for O-Rings
SAE J1 20—Rubber Rings for Automotive Applications
SAE J200—Classification System for Rubber Materials
SAE J51 8—Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Bolt Split Flange Type
SAE J1 453-2 1 —Specification for O-Ring Face Seal Fittings—Part 2: Fittings with SAE J1 926/2 (ISO 1 1 926-2), Inch Stud Ends
SAE J1 453-3 2 —Specification for O-Ring Face Seal Fittings—Part 3: Fittings with SAE J2244-2 (ISO 61 49-2), Metric Stud Ends
SAE J1 926-2—Connections for Fluid Power and General Use—Ports and Stud Ends with ISO 725 Inch
Threads and O-Ring Sealing—Part 2: Heavy-Duty (S Series) Stud Ends—Dimensions, design, Test Methods and Requirements
SAE J1926-3—Connections for Fluid Power and General Use—Ports and Stud Ends with ISo 725 Inch
Threads and O-Ring Sealing—Part 3: Light-Duty (L Series)Stud Ends—Dimensions, Design, TestMethods,and Requirements
SAE J2244-2—Connections for Fluid Power and General Use—Ports and Stud Ends with ISO 261 Metric
Threads and O-Ring Sealing—Part 2: Heavy-Duty (S Series) Stud Ends—Dimensions, Design,TestMethods,and Requirements
SAE J2244-3—Connections for Fluid Power and General Use—Ports and Stud Ends with lSO 261 Metric
Threads and O-Ring Sealing—Part 3: Light-Duty (L Series) Stud Ends—Dimensions, Design, TestMethods,and Requirements
2.1.2 ISO PUBLICATIONS—Available from ANSI, 25 West 43rd Street, New York, NY 10036-8002.
ISO 3601-3:1987—Fluid systems—Sealing devices—O-rings—Part 3: Quality acceptance criteriaISO 5598:1985—Fluid power systems and components—Vocabulary
ISO6149-2—Connections for fluid power and general use-Ports and stud ends with lSO 261 metric
threads and O-ring sealing—Part 2: Heavy duty (S series) stud ends—Dimensions, design,testmethods and requirements
ISO6149-3—Connections for fluid power and general use—Ports and stud ends with ISO 261 threads and
O-ring sealing—Part 3: Light duty (L series) stud ends—Dimensions,design,test methods andrequirements
ISO6162—Hydraulic fluid power—Four-screw split-flange connections for use at pressures of 2.5 MPa to
40 MPa—Type l inch series and type ll metric series
ISO 8434-3—Metallic tube connections for fluid power and general use—Part 3:O-ring face seal fittingISO11926-2—Connections for fluid power and general use—Ports and stud ends with lSO 725 threads
and O-ring sealing—Part 2: Heavy duty (S series) stud ends—Dimensions, design, test methods, andrequirements
ISO11926-3—Connections for fluid power and general use—Ports and stud ends with lSO 725 threads
and O-ring sealing—Part 3: Light duty (L series) stud ends—Dimensions, design, test methods, andrequirements
2.1.3 ASTM PuBLICATION—Available from ASTM,100 Barr Harbor Drive, West Conshohocken,PA 19428-2959.
ASTM D 2000—Classification System for Rubber Materials in Automotive Applications
2.2Related Publications—The following publications are provided for intormation purposes only and are not a required part of this document.
SAE J515:2001 pdf download
![SAE J515:2001 pdf download](https://www.onlinestandardssearch.com/wp-content/uploads/2022/10/SAE-J515.png)