ASME B18.15:2015 pdf free download.Forged Eyebolts.
6 SHANK LENGTH
Shank length includes the chamfer to the underside of the eye ring for plain pattern (straight shank) and to the faced collar for shoulder pattern eyebolts,
7 MATERIAL
7.1 Carbon and Alloy Steel Forged
The material and mechanical property requirements for general purpose carbon steel eyebolts shall be in accordance with ASTM A489. Eyebolts requiring improved toughness or intended primarily for temperature applications to —40°F (—40°C) shall be in accordance with ASTM F541. ASTM A49 and ASTM F541 eyebolts shall be capable of meeting the rated capacities of Tables 3 and 4.
7.2 Corrosion-Resistant Steel Forged
When corrosion-resistant steel is required, refer to ASTM A473, alloy types 304, 304L or 316, and 316L. Eyebolts of ASTM A473 materials shall be capable of meeting the rated capacities of Tables 3 and 4. The alloy type as listed in ASTM A473 shall be marked on the eycbolt eye.
7.3 Other Materials
When other materials are required, the material shall be as agreed upon by the purchaser and supplier.
8 FINISH
8.1 Steel
8.1.1 Unless otherwise specified, eyebolts shall be supplied with a natural (as processed) finish, unplated or uncoated, in a clean condition, and lightly oiled.
8.1.2 When zinc plating is specified, ASTM Fl 941 shall be designated Other finishes may be used based on an agreement between the purchaser and supplier. his is not recommended; see para. C-7 in Nonmandatory Appendix C.)
8.2 Corrosion-Resistant Steels
Corrosion-resistant steels shall be passivated in accordance with ASTM A380.
9DESIGNATION
Eyebolts shall be designated by the following data inthe sequence shown below:
a)ASME B18.15
(b) nominal size (fractional or decimal equivalent)and threads per inch
(c) pattern
(d) type
(e)style material (including standard), including alloy type
(f) stainless steel
(g)surface treatment (when specified including stan-dard number), including required callout from standard
10.1 Defects
Eyebolts shall be free from visible defects that mightaffect serviceability. Eyebolts should be routinelyvisually inspected for such defects according toASME B18.18.
10.2 Dimensional Conformance
Unless otherwise specified, all characteristics shall beinspected to the inspection levels shown inASME B18.18.
10.3 Tensile Properties
The tensile properties shall be determined in accor-dance with ASTM F606 using the thread engagementsas prescribed in Nonmandatory Appendix C.
ASME B18.15:2015 pdf free download
