ASME B30.6:2020 pdf free download.Derricks.
rock anchor: an anchoring device inserted in a hole drilled into rock or concrete. The device is secured in the hole to withstand a predetermined load.
rope: refers to wire rope unless otherwise specified. rotation-resistant rope: a wire rope consisting of an inner layer of strand laid in one direction covered by a layer of strand laid in the opposite direction. This has the effect of counteracting torque by reducing the tendency of the finished rope to rotate.
side loading: a load applied at an angle to the vertical plane of the boom.
sill: a member connecting the sill block to the lower end of the stimeg, or a member connecting the lower ends of a double-member mast.
sill block: the lower support on which the mast rotates. specified clearance(s): the distance from an electrical conductor as determined by para. 6.3.5.3.1(a).
standby derrick: a derrick not In regularservice that is used occasionally or Intermittently as required.
stiffleg: a rigid member supporting the mast at the head. swing: rotation of the mast or boom for movements of loads in a horizontal direction about the axis of rotation.
two-blocking: the condition in which the lower load block or hook assembly comes in contact with the upper load block or boom point sheave assembly.
upper load block: the assembly of sheaves, pins, and frame suspended from the boom.
working load: the external load applied to the equipment, Including the weight of load-attaching equipment such as hoisting ropes, lower load block, shackles, and slings.
SECTION 6-0.3: TECHNICAL AND SAFETY- RELATED INFORMATION
The manufacturer shall provide instructions I manual(s) for the operation, inspection, maintenance. assembly, and disassembly of the equipment.
(a) The instructions shall be provided In a language specified by the purchaser at the time of the initial sale by the manufacturer.
(b) Pictograms used to Identify controls shall be described in the instructions. The pictograms should comply with ISO 7000, ISO 7296, or another recognized source, if previously defined.
(c) Translations of the original language instructions (if the manufacturer no longer exists, translation of the instructions with the machine is acceptable) shall meet professional translation industry standards, which include, but are not limited to, the following:
(1) translating the complete paragraph message, instead of word by word
(2) ensuring grammatical accuracy
(3) preserving the source document content without omitting or expanding the text
(4) translating the terminology accurately
(5) reflectIng the level of sophistication of the original document
(d) The finished translation shall be verified for compliance with (c)(1) through (c)(5) by a qualified person having an understanding of the technical content of the subject matter.
SECTION 6-0.4: PERSONNEL COMPETENCE
Persons performing the functions identified in this Volume shall, through education, training, experience, skill, and physical fitness, as necessary, be competent and capable to perform the functions as determined by the employer or employer’s representative.
SECTION 6-0.5: REFERENCES
The following is a list of standards and specifications referenced In this Volume, showing the year of approval:
ANSI/AWS D1.1/D1.1 M:2010, Structural Welding Code ANSI/AWS D14.3/D14.3M:2010, Specification for
Welding Earth-moving, Construction and Agricultural Equipment.
ASME B30.6:2020 pdf free download
