ASME B5.62M:2016 pdf free download

ASME B5.62M:2016 pdf free download.Hollow Taper Tooling With Flange-Face Contact.
(e) Form E. Form E is similar to Form A. but it does not have keyways or orientation features. Form E is intended for high-speed machining. See Figure 1-1.3-1, illustration (e).
(f) Form F. Form F is similar to Form E but has a reduced taper size. Form F Is intended for high-speed machining. See Figure 1-1.3-1, illustration (1).
(g) Form T. Form T is similar to Form A but has modilicatlons to accommodate use with stationary tools. See Figure 1-1.3-1, illustration (g).
1-1.4 Definitions
balance: the condition in which the mass centerline and rotational centerline of a rotor are coincident.
clamp set: a mechanical device for securing a shank in the receiver.
data chip: a radio-frequency identification device.
drive key: a feature ofa machine tool intended to orient the toolholder in the receiver and assist in delivery of the driving torque from the spindle nose to the tool.
keyway: the part of a machine tool that receives the drive key.
receiver: the spindle or nonrotating socket of a machine. shank: a unit that fits directly into the spindle or nonrotating socket of a machine.
spindle: component assembly of the machine tool, the function of which is to accept the basic toolholder shank. spindle nose: that part of a spindle into which the shank is accepted.
1-1.5 Figure Interpretation
The Part 1 figures are illustrated and labeled in accordance with ASME Y14.5.
1-2 FORMSAANDC
Form A includes provisions for automatic tool change, a data chip, an orientation notch, an access hole for manual clamping, drive keyways, and through-spindle coolant supply via coolant tube. Form C is intended for manual tool change and includes an access hole for manual clamping, drive keyways, and through-spindle coolant supply.
Figures 1-2-1 and 1-2-2 and Table 1.2-1 show the geometry and dimensions of HSK Forms A and C.
1-3 FORMS B AND D
Forms k3 and D include pluvisions for a data chip, an orientation notch, an access hole for manual clamping, drive keyways, and through-spindle coolant supply.
Figures 1-3-1 and 1-3-2 and Table 1-3-1 show the geometry and dimensions of HSK Forms H and D.
1-4 FORM E
Form E includes provisions for through-spindle coolant supply and automatic tool change. Form E does not Include provisions for a data chip, an orientation notch, an access hole for manual clamping, or drive keyways.
Figure 1-4-1 and Table 1-4-1 show the geometry and dimensions of HSK Form E.