ASME QAI-1:2003 pdf free download

ASME QAI-1:2003 pdf free download.QUALIFICATIONS FOR AUTHORIZED INSPECTION.
1-1.2.3
Maintain qualified Supervisors to monitor the performance of the Authorized Nuclear Inspectors
and to audit the activities at nuclear shops and field sites for which inspection agreements have been made, in accordance with the requirements of 1-2.26
1-1.2.4 Give written notice to all Authorized Nuclear Inspectors of the name, office address, and office and home phone numbers of their respective Supervisors.
1-1.2.5 Assure proper execution of responsibilities. In particular, the Agency shall:
(a) establish and implement an internal program which shall provide assurance that those of its employees holding the positions of Supervisor and Authorized Nuclear Inspector perform work in accordance with the requirements of Part 1 of this Standard. This program shall be documented by written policies, procedures, or instructions and shall be carried out throughout the life
term of any agreement cuvering inspectiurns required by the ASME Code, in accordance with the program. The program shall provide for indoctrination and training of personnel performing such activitics, as necessary, to assure that suitable proficiency is achieved and maintained.
(b) provide instructions in writing to Authorized Nuclear Inspectors and their Supervisors, specifying their respective duties and responsibilities.
(c) provide instructions in writing to Authorized Nuclear Inspectors requiring them to immediately contact their Supervisor whenever the Inspector is unable to readily resolve any question concerning ASME Code compliance, manufacturing procedure, or quality assurance provision or its implementation. Instructions should be included as a reminder to the Authorized
Nuclear inspecior thal he has the authorily and the duty to refuse to sign any Data Reports involving nonconformance with the ASME Code.
(d) conduct annual planned audits of activities performed by Authorized Nuclear Inspector Supervisors to verify compliance with the provisions of the ASME Code Section II, Division 1 or Division 3, or both, and Part 1 of this Standard. The audit shall be performed by
appropriately trained personnel, in accordance with a written procedure or checklist. Audit resuults shall be documented and reviewed by management. Follow-up action, inciuding reaudit of deficient areas, shali be taken where indicated to assure that necessary corrective
action is completed.