ASME Y14.34:2008 pdf free download

ASME Y14.34:2008 pdf free download.Associated Lists.
4.3 Sheet Numbering
The shects of a multisheet list shall initially be numbered consecutively with whole Arabic numbers. The total quanhty of sheets shall be entered on the cover sheet, first sheet, or the last sheet. In lieu of total quantity of sheets, a statement such as “[ND OF UST” may be added on the last sheet. The total quantit of sheets shall be the actual sheet count.
4.4 Cover Sheets
When a separate list is prepared and a cover sheet is used, it shall include the mandatory information shown in Fig. I. other information may also be included.
4.5 Revisions
Revisions shall be prepared in accordance with ASME Y14.35M and as detailed in paras, 4.5.1 through 4.5.3.
4.5.1 New items may be added at the end of a list or inserted in the lisL
4.5.2 In lieu of a REVISION DATE and REV AUTHORIZATION NO block, lists may include a REVISION HISTORY block
4.5.3 Items that are relocated due to additions or deletions are not considered revised.
4.6 Heading Requirements
4.6.1 The requirements in Fig. 1 shall apply to each sheet in preparation of associated lists heading information, except where noted as optional. The locations of heading information may vary to suit the nevds of the preparing activity.
4.6.2 Continuation sheets of an associated list may limit heading information to DAI, IDENTIFYING NO, REVISION, and SHEET.
4.7 List identification
List identification is established through the assodated drawing iiumher or part or Identifying number (PIN) and the original design activity identification (DAI). The list number of an associated list is established by a prefix, such as AL. DL. IL, P1, or WL, and its separate associated drawing number or PIN as applicable.
S PARTS LIST PREPARATiON
A parts list shall be prepared for each assembly drawing and may be prepared For other drawings. An integral parts List may be prepared on drawing graphic sheets or on drawing sheets separate from the drawing graphic sheets (see Figs. 2 and 3). A separate parts list shall be prepared separate from the drawing. Parts list columnar heading may be placed at the top or bottom of columns (see Figs. 2 and 3). In accordance with the following.