BS IEC 60092-101:2018 pdf free download Electrical installations in ships – Part 101: Definitions and general requirements
1 Scope
This part of IEC 60092 is applicable to electrical installations for use in ships.
The definitions and general requirements given in this part are applicable, unless otherwise indicated, to other parts of the IEC 60092 series.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60034-30-1 , Rotating electrical machines – Part 30-1: Efficiency classes of line operated AC motors (IE code)
IEC 60079 (all parts), Explosive atmosphere
IEC 60092-201 , Electrical installations in ships – Part 201: System design – General
IEC 60092-305, Electrical installations in ships – Part 305: Equipment – Accumulator (storage) batteries
IEC 60092-504:201 6, Electrical installations in ships – Part 504: Automation, control and instrumentation
IEC 60529, Degrees of protection provided by enclosures (IP Code)
IEC 60533, Electrical and electronic installations in ships – Electromagnetic compatibility (EMC) – Ships with a metallic hull
IEC 60664-1 , Insulation coordination for equipment within low-voltage systems – Part 1:Principles, requirements and tests
IEC 60695-1 1 -5, Fire hazard testing – Part 11-5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance
IEC 61 439-1 :201 1 , Low-voltage switchgear and controlgear assemblies – Part 1: General rules
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
NOTE Definitions included in this part are those having general application in IEC 60092. Definitions applying to particular apparatus or equipment which are only included within a single part of IEC 60092 are separately defined in that part only.
3.1
appropriate authority
governmental body and/or classification society whose rules a ship is required to comply with
3.2
ocean-going ship
ship not exclusively employed in the navigation of rivers or inland waters
3.3
essential services
services essential for the navigation, propulsion, steering or manoeuvring of the ship, or for the safety of human life, or for special characteristics of the ship (for example special services)
3.4
accessory
device, other than a luminaire (see IEC 60092-306), associated with the wiring and current using appliances of an installation EXAMPLE Switch, fuse, plug, socket-outlet, lampholder or junction box.
3.5
bond
connection of non-current-carrying parts to ensure continuity of electrical connection, or to equalize the potential between parts comprising, for example, the armour or lead sheath of adjacent length of cable, the bulkhead, etc.
EXAMPLE Bulkhead and cables in a radio-receiving room.
3.6
earth
general mass of the metal hull of the ship
Note 1 to entry: In the USA, “ground” is used instead of “earth”.
3.7
earthed
connected to the general mass of the hull of the ship in such a manner as will ensure at all times an immediate discharge of electrical energy without danger
Note 1 to entry: A conductor is said to be “solidly earthed” when it is electrically connected to the hull without a fuse-link, switch, circuit-breaker, resistor, or impedance, in the earth connection.
Note 2 to entry: In the USA. “grounded” is used instead of “earthed”.
3.8
basic insulation
insulation of hazardous-live-parts which provides basic protection
Note 1 to entry: This concept does not apply to insulation used exclusively for functional purposes [SOURCE: IEC 60050-1 95:1 998, 1 95-06-06]
BS IEC 60092-101:2018 pdf free download
