BS ISO 15380:2016 pdf download.Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems)
1 Scope
This International Standard specifies the requirements for environmentally acceptable hydraulic fluids and is intended for hydraulic systems, particularly hydraulic fluid power systems. The purpose of this International Standard is to provide guidance for suppliers and users of environmentally acceptable hydraulic fluids and for the direction of original equipment manufacturers of hydraulic systems.
This International Standard stipulates the requirements for environmentally acceptable hydraulic fluids at the time of delivery.
Classification of fluids used in hydraulic application is defined in ISO 6743‑4. This International Standard encompasses only four of the categories of environmentally acceptable fluids covered by ISO 6743‑4. These categories are HETG, HEPG, HEES and HEPR. The minimum content of base fluid for each category shall not be less than 70 % (m/m).
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 2049, Petroleum products — Determination of colour (ASTM scale)
ISO 2160, Petroleum products — Corrosiveness to copper — Copper strip test
ISO 2592, Determination of flash and fire points — Cleveland open cup method
ISO 3016, Petroleum products — Determination of pour point
ISO 3104, Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
ISO 3170, Petroleum liquids — Manual sampling
ISO 3448, Industrial liquid lubricants — ISO viscosity classification
ISO 3675, Crude petroleum and liquid petroleum products — Laboratory determination of density —Hydrometer method
ISO 4259, Petroleum products — Determination and application of precision data in relation to methods of test
ISO 4263-1, Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids — TOST test — Part 1: Procedure for mineral oils
ISO 4263-3, Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids using the TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids
ISO 4406, Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles
ISO 6072, Rubber — Compatibility between hydraulic fluids and standard elastomeric materials
ISO 6245, Petroleum products — Determination of ash
ISO 6247, Petroleum products — Determination of foaming characteristics of lubricating oils
ISO 6296, Petroleum products — Determination of water — Potentiometric Karl Fischer titration method
ISO 6341, Water quality — Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) — Acute toxicity test
ISO 6614, Petroleum products — Determination of water separability of petroleum oils and synthetic fluids
ISO 6618, Petroleum products and lubricants — Determination of acid or base number — Colour-indicator titration method
ISO 6619, Petroleum products and lubricants — Neutralization number — Potentiometric titration method
ISO 6743-4, Lubricants, industrial oils and related products (class L) — Classification — Part 4: Family H (Hydraulic systems)
ISO 7120, Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water
ISO 7346-2, Water quality — Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] — Part 2: Semi-static method
ISO 8192, Water quality — Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation
ISO 9120, Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method
ISO 9439, Water quality — Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium — Carbon dioxide evolution test
ISO 10634, Water quality — Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium
BS ISO 15380:2016 pdf download
![BS ISO 15380:2016 pdf download](https://www.onlinestandardssearch.com/wp-content/uploads/2022/10/0-65.png)