SAE AS 604D:2000 pdf download Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Heavyweight, Hydraulic
1 . SCOPE: This Aerospace Standard (AS) defines the requirements for a heavy braid polytetrafluoroethylene (PTFE) lined, metallic reinforced, hose assembly suitable for use in high temperature, 400 °F, high pressure, 3000 psi, aircraft hydraulic fluid systems, also for use in pneumatic systems which allow some gaseous diffusion through the PTFE wall. The -20 size operating temperature is limited to 275 °F maximum.
2. REFERENCES:
2.1 Applicable Documents: The following publications form a part of this document to the extent specified herein. The latest issue of SAE publications shall apply. The applicable issue of other publications shall be the issue in effect on the date of the purchase order. In the event of conflict between the text of this document and references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
2.1.1 SAE Publications: Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.
AMS 5556 Steel, Corrosion and Heat Resistant, Seamless or Welded Tubing, 18Cr 11Ni 0.70(Cb+Ta) (SAE 30347), Hydraulic, Solution Heat Treated
AMS 5557 Steel Tubing, Seamless and Welded, Corrosion and Heat Resistant, 18.5Cr 10.5Ni 0.40Ti (SAE 30321), Hydraulic, Solution Heat Treated
AMS 5567 Steel Tubing, Seamless or Welded, Corrosion Resistant, 19Cr 10Ni (SAE 30304), Hydraulic, Annealed
AMS 5561 Steel Tubing, Welded and Drawn, Corrosion and Heat Resistant, 9.0Mn 20Cr 6.5Ni 0.28N (SAE 21-6-9), High-Pressure Hydraulic
AMS 5570 Steel, Corrosion and Heat Resistant, Seamless Tubing, 18Cr 11Ni 0.40Ti (SAE 30321), Solution Heat Treated
2.1.4 (Continued):
2.1.5 ASME Publications: Available from ASME, 22 Law Drive, Box 2900, Fairfield, NJ 07007-2900.
ASME B46.1 Surface Texture
2.1.6 PRI Publications: Available from Performance Review Institute, 161 Thornhill Road, Warrendale,PA 15086-7527 (www.pri.sae.org).
PD2001 Qualified Product Management Council Procedures for Qualified Products Group
PD2101 Aerospace Quality Assurance, Product Standard, Qualification Procedures, Fluid Systems
2.2 Hose Assembly Procurement Specifications:
Refer to AS604SUP1 for a listing of applicable hose assembly procurement standards applicable to this document.
3. TECHNICAL REQUIREMENTS:
3.1 Qualification:
Hose assemblies supplied in accordance with this document shall be representative of products which have been subjected to and which have successfully passed the qualification tests in this standard.
3.1.1 Manufacturer Qualification: A manufacturer producing a product in conformance to this procurement specification shall be accredited in accordance with the requirements of PD2101, AS7003 and AS7112, and shall be listed in a Performance Review Institute (PRI) Qualified Manufacturers List (QML).
3.1.2 Product Qualification: All products shall conform to the requirements of this procurement specification and shall be approved in accordance with the requirements of PD2001 and PD2101, for listing in a Performance Review Institute (PRI) Qualified Parts List (QPL).
3.2 Material: The hose assembly materials shall be uniform in quality, free from defects, consistent with good manufacturing practice, shall conform to applicable specifications and the requirements specified herein, and suitable for the purpose intended.
SAE AS 604D:2000 pdf download
![SAE AS 604D:2000 pdf download](https://www.onlinestandardssearch.com/wp-content/uploads/2022/10/SAE-AS-604D.png)