SAE AS 9944:2000 pdf download

SAE AS 9944:2000 pdf download BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, FULL SHANK, STEEL AMS 6322, CADMIUM PLATED, .375-24 UNJF-3A
1.SHANK SHALL BE STRAIGHT WITHIN .0025 TOTAL PER INCH OF BOLT LENGTH.
2.THE CONCENTRICITY OF THREAD PD IN RELATION TO THE SHANK SHALL BE WITHIN .O06 FIR.
3.THE CONCENTRICITY OF THE SHANKIN RELATION TO THE WASHER FACE DIAMETER AND DOUBLE HEXAGON oD SHALL BE WITHIN .009 FIR.
4.MATERIAL: STEEL AMS 6322.
5.HARDNESS: ROCKWELL C26-32.
6.FINISH:CADMIUM PLATE AMS 2400. DIMENSIONS SPECIFIED ARE AFTER PLATING.
7.MANUFACTURING SPECIFICATION:AMS 7452 EXCEPT HEAD SHALL BE UPSET.
8.HEAD TO SHANK FILLET SHALL BE COLD wORKED.
9.MAGNETIC PARTICLE INSPECTION PER AMS 2640 AFTER PLATING.
10.SURFACETEXTURE:USAS B46.1-1962.UNLESS OTHERWISE SPECIFIED,SURFACES TO BE 125MICROINCHES EXCEPT UPSET HEAD.
11.BREAK SHARP EDGES .003-.015 UNLESS OTHERWISE SPECIFIED.
12.DIMENSIONS IN INCHES.UNLESS OTHERWISE SPECIFIED,TOLERANCES: LINEAR DIMENSIONS±.010,ANGULAR DIMENSIONS 5°.
13.DO NOT USE UNASSIGNED PART NUMBERS.
AS AND AMS ARE SOCIETY OF AUTOMOTIVE ENGINEERS, INC.PUBLICATIONS.
THIS STANDARD WAS DEVELOPED COOPERATIVELYWITHTHE MILITARY SERVICES BYTHE SAE AEROSPACEPART STANDARDS DIVISION.